Summary
Overview
Work History
Education
Skills
Websites
ICT Skills
Languages
References
Hobbies and Interests
Languages
Timeline
Generic
AHMED DARWISH

AHMED DARWISH

Espoo

Summary

Lead project engineer with +10 years of experience in Industry of packaging and glass prevailing skills in manufacturing,production, and maintenance along with managerial skills on a broad scale.

Believing in the ''Can-Do" attitude, I am highly devoted in scaling up novel ideas and contribute to its feasibility and sustainability especially the ones that explicit impact towards the SDGs.

Overview

13
13
years of professional experience

Work History

Senior Solutions Lead Engineer

Wartsila Energy Finland Oy
Helsinki
04.2022 - Current
  • Lead the project software team to deliver the code with the customer requirements and specifications.
  • Deliver the project software reports for the project progress on Jira system.
  • Lead the AFEU and MEA region Solutions team meeting with the project stockholders.

Lead Engineer - Controls Engineering

GE Grid Solutions Oy
12.2020 - 03.2022
  • Produce high quality project study documents and specifications
  • Perform SW testing, verification & validation of control system and factory acceptance test (FAT)
  • Participate in technical negotiations with end customers and other stakeholders

Assembly Trainee Engineer

CAN MAN AG
07.2019 - 08.2019
  • Install and assemble the welder mechanical parts by design drawings
  • Test, install and commission Beckhoff PLC using Twincat software
  • Implement the needed modification for PLC and drives programs during the testing process
  • Test the welder according to CAN MAN IBS protocol with the FAT test procedure.

Electrical and Energy Section Head

Sphinx Glass plant
01.2014 - 08.2018
  • Coaching the electrical team of 4 shift crews for developing maintenance programs on machines and equipment.
  • Project planning and execution, including cost and timing for production continuous improvement.
  • Monitor the actions plan to improve the maintenance KPI’s (breakdown rate, preventive rate, reactivity, maintenance cost etc.
  • Encouraging safe work practices and an accident-free work environment.
  • Promoted Energy Saving awareness and training for the engineering and operational staff.
  • Succeeded to minimize the annual Electricity Consumption by 6 % in June 2018.

Maintenance Shift Lead

Sphinx Glass Egypt
03.2014 - 12.2018
  • Lead a crew team of 6 technicians (3 Elec + 3 Mech) to execute the daily round sheets, preventive maintenance plans and programs for Control, Power and Mechanical machines and devices within HSE and safety disciplines.
  • Resopond for emergency breakdown or fault in the production process and take the fast corrective action to keep the production reliability.
  • Implement fault diagnosis, Reactive Maintenance, Scheduled Maintenance, Root Cause Analysis (RCA), Reliability Centred Maintenance (RCM) analysis and reports.
  • Modify and troubleshoot PLC, SCADA, Electric drives systems according to the production process needs during the shift.

Electrical and Mechanical Lead

CAIRO PAC for Packging
Cairo
06.2011 - 02.2014
  • Attended the installation and commissioning of 3 production lines for Can Making machines with experts.
  • Formed the production and maintenance team from skilled and fresh technicians and engineers.
  • Developed the maintenance and production system from scratch for the plant.
  • Preventative maintenance on machines and equipment.
    - Responding to emergency breakdowns throughout the plant.
  • Problem solving - involving route cause analysis and preventative actions.
  • Succeeded to increase the production efficiency from 21% to 73% before Feb 2014 using TPM.

Education

MSc. In Electrical Engineering -

Tampere University
01.2020

BSc. in Electrical Engineering -

Benha University
01.2008

Skills

  • Project Management, TPMs, Lean Manfacturing, Six Sigma
  • Strong prioritizing
  • Time management
  • ISO 9001, 18001, 14001 and 50001
  • KAIZEN, PMs, RCA and SOPs
  • Independency leading skills
  • Lean production operations
  • Root cause analysis
  • Problem solving
  • Continuous improvements
  • Win-Win teamwork negotiation
  • CAN-DO attitude
  • Corrective and Preventive Action (CAPA)
  • SAP, AX Microsoft project, Jira and Confluence
  • GIT
  • MS office
  • SCADA, PLCs and Industrial Process Control
  • Industrial Communications

ICT Skills

  • SAP and AX Microsoft project.
  • Jira, Confluence & GIT.
  • MS office (Word, Excel, PowerPoint, Microsoft Teams and Outlook)
  • PLC: Siemens S7 300, 400, Allen Bradly ControlLogix.
  • SCADA: Wonderware Intouch & Citect.
  • MATLAB Simulink.
  • Industrial Communications: Ethernet, DeviceNET, ControlNet and EtherCAT, ProfiNet, ProfiBus, ModBus & CanBus.
  • VPN, Gatways, EtherNet Switches: Moxa.
  • C++ & Python: Basics.

Languages

  • English, Fluent
  • Finnish, Elementary
  • Arabic, Native

References

  • Juha Halli, former Engineering Manager in GE Grid Solutions, Finland, Juha.halli@kempower.com, +358 45 122 3140
  • Jussi Parkkali, Plant Manager, Sphinx Glass, Lahti, Finland, Jussi.m.parkkali@fi.nsg.com, +358 50 593 5157
  • Johnny Umbricht, Production Manager, CAN MAN AG, Switzerland, J.umbricht@canman.ch, +41 79 741 73 78
  • Philip Hefferon, Sphinx Glass plant manager, Cairo, Egypt, phefferon@sphinxglass.com, +44 7368 149 331

Hobbies and Interests

  • Table Tennis Ping Pong, Tampere University of Technology Ping Pong League Trophy Champion.
  • Sauna Snow Shower.
  • Camping and Nature.

Languages

Arabic
First Language
English
Proficient (C2)
C2
Finnish
Beginner
A1

Timeline

Senior Solutions Lead Engineer

Wartsila Energy Finland Oy
04.2022 - Current

Lead Engineer - Controls Engineering

GE Grid Solutions Oy
12.2020 - 03.2022

Assembly Trainee Engineer

CAN MAN AG
07.2019 - 08.2019

Maintenance Shift Lead

Sphinx Glass Egypt
03.2014 - 12.2018

Electrical and Energy Section Head

Sphinx Glass plant
01.2014 - 08.2018

Electrical and Mechanical Lead

CAIRO PAC for Packging
06.2011 - 02.2014

MSc. In Electrical Engineering -

Tampere University

BSc. in Electrical Engineering -

Benha University
AHMED DARWISH