Gintaras Brazaitis
Marijampole
Overview
6
6
years of professional experience
Work History
Welder
UAB Arginta Engineering
04.2022 - 08.2023
- Welded in flat, horizontal, vertical, and overhead positions.
- Inspected welds and checked critical measurements to meet specifications.
- Fabricated shop parts directly from blueprints.
- Removed and repaired unacceptable welds with air arc and grinder to meet quality guidelines.
- Prepared welding equipment to perform advanced welding work.
- Clamped, held, tack-welded, heat-bent and bolted component parts to achieve required configurations and positions.
- Completed welding projects using gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, and shielded metal arc equipment.
- Operated hoists, cranes, and power tools to dismantle equipment to find and remove defective parts.
- Chipped off excess weld, slag, and spatter using hand tools.
- Utilized blueprints and diagrams to compare finished products against design specifications.
- Set up and operated shielded metal arc and gas metal arc welding equipment.
- Salvaged and rebuilt parts to achieve cost savings and reduce waste.
- Trained and supervised junior welders to use proper techniques, apply best practices and comply with quality standards.
- Collaborated with engineers and designers to create new parts and assemblies.
- Maintained safety by wearing protective equipment, staying alert and following procedures.
- Cut, grinded and bent edges of materials to be joined for snug fit using power grinders and hand tools.
- Welded metal components in vertical, overhead and flat positions.
- Bolted, clamped and tack-welded parts to secure components prior to welding.
- Welded various connections with high-quality final results.
- Prepared for assembly by positioning, aligning and securing parts using tools such as jigs and vises.
- Inspected welds for accuracy and conformance to specifications.
- Inspected pieces for defects, measured, and checked with straightedges or templates for compliance with specifications.
- Avoided warping, shrinkage, and distortion by carefully controlling welding processes.
- Selected and operated shielded metal arc and gas metal arc welding equipment.
Welder
UAB Hirelabas
06.2021 - 07.2021
- Welded in flat, horizontal, vertical, and overhead positions.
- Inspected welds and checked critical measurements to meet specifications.
- Fabricated shop parts directly from blueprints.
- Removed and repaired unacceptable welds with air arc and grinder to meet quality guidelines.
Welder
Repair Company
10.2020 - 11.2020
- Welded in flat, horizontal, vertical, and overhead positions.
- Inspected welds and checked critical measurements to meet specifications.
- Fabricated shop parts directly from blueprints.
- Removed and repaired unacceptable welds with air arc and grinder to meet quality guidelines.
Welder
Contruction Company
08.2019 - 11.2019
- Welded in flat, horizontal, vertical, and overhead positions.
- Inspected welds and checked critical measurements to meet specifications.
- Fabricated shop parts directly from blueprints.
- Removed and repaired unacceptable welds with air arc and grinder to meet quality guidelines.
- Prepared welding equipment to perform advanced welding work.
- Clamped, held, tack-welded, heat-bent and bolted component parts to achieve required configurations and positions.
- Chipped off excess weld, slag, and spatter using hand tools.
- Set up and operated shielded metal arc and gas metal arc welding equipment.
- Maintained safety by wearing protective equipment, staying alert and following procedures.
Welder
Peikko Oy
02.2018 - 09.2018
- Welded in flat, horizontal, vertical, and overhead positions.
- Inspected welds and checked critical measurements to meet specifications.
- Fabricated shop parts directly from blueprints.
- Removed and repaired unacceptable welds with air arc and grinder to meet quality guidelines.
Welder
Peikko
11.2017 - 01.2018
- Welded in flat, horizontal, vertical, and overhead positions.
- Fabricated shop parts directly from blueprints.
- Removed and repaired unacceptable welds with air arc and grinder to meet quality guidelines.
- Clamped, held, tack-welded, heat-bent and bolted component parts to achieve required configurations and positions.
- Chipped off excess weld, slag, and spatter using hand tools.
Skills
- Flux Core (FCAW) Welding
- TIG Welding Expertise
- MIG Welding
- Pipe Welding
- Overhead Welding Position
- Crane and Hoist Equipment Operation
Languages
Lithuanian
Native language
English
Proficient
C2
Russian
Beginner
A1
Timeline
Welder
UAB Arginta Engineering
04.2022 - 08.2023
Welder
UAB Hirelabas
06.2021 - 07.2021
Welder
Repair Company
10.2020 - 11.2020
Welder
Contruction Company
08.2019 - 11.2019
Welder
Peikko Oy
02.2018 - 09.2018
Welder
Peikko
11.2017 - 01.2018
Similar Profiles
Robertas KumžaRobertas Kumža
Welder at UAB "Arginta Engineering"Welder at UAB "Arginta Engineering"
ZAINAB G. SULEIMANZAINAB G. SULEIMAN
Student Design Engineer at UAB Biomedical Engineering DepartmentStudent Design Engineer at UAB Biomedical Engineering Department
Jatorrious KingJatorrious King
Student at UAB School of EngineeringStudent at UAB School of Engineering
Laurynas BabinskasLaurynas Babinskas
Car Parts Salesman/technician at Uab LigerdaCar Parts Salesman/technician at Uab Ligerda
Edvinas MockusEdvinas Mockus
Website Administrator at MyselfWebsite Administrator at Myself