Kyaw Naing Lin
Mechanical & Rotating Engineer/Supervisor
Lappeenranta
Summary
I have 16 years of experience in ship repair and conversion as a mechanical engineer, as well as 6.5 years in oil & gas refinery maintenance Workshop Leader / Senior Superintendent, I am confident in my ability to contribute to your team.
Throughout my career, I have developed strong technical skills and a deep understanding of the industry. I have a proven track record of successfully managing complex projects and leading teams to deliver high-quality results. My experience in both ship repair and oil & gas refinery maintenance has given me a diverse skill set and a comprehensive understanding of the industry.
Overview
23
23
years of professional experience
Work History
SNR SUPERINTNEDENT / MAINTENANCE WORKSHOP LEADER
PEC LIMITED
01.2017 - 04.2024
- Coordinate with project Manager & Site manager in development planning, inspection, reporting and attending meeting for daily work plan
- Liaise with client and Manage PEC Supervisors, planners/Engineers’ concerns with equipment prior to being booked daily requirement at site
- Managed and guide all Supervisors, Engineers, and Apprentice Technicians in the diagnosis of job problems
- Ensure that staff are using their time effectively and efficiently
- Upon completion of normal repairs and/or service inspect and review technical report & test reports
- Completed job to ensure the equipment has been repaired and/or serviced in accordance with the client instructions and guidelines
- Ensure all workshop equipment & tools is presented back to in a clean and presentable standard
- Check and inspect that all tools are available and maintained in the correct place and that all equipment is in suitable working condition
- Advise all new and existing staff of Dealership procedures
- Setup a regular workshop cleaning schedule & highlighting team member specific duty
- Make suggestions to management for improvements to the workshop & site
- Maintain & well-trained workforce and supervise in-house training as required
- Ensure the development and progress of all apprentices
- Assist toward keeping the workshop area clear and clean, orderly, and attractive
- Perform all other duties as assigned by the client or management in a professional and efficient manner
- Assist in the coordinating after hours call outs and the weekly on call roster
- To Lead overall workshop job activities such as: To assign manpower, coordination with client, coordinating logistic activities, plant Mobile vehicles & Equipment maintenance, Control of all tools & equipment, Valve servicing team, Machinist Team, Mechanic Team, and Fabrication Team to ensure work safely and job done in time
- To lead and coordinate with lifting supervisor to ensure follow lifting procedure & lifting plan to ensure work safely and job done in time
- Managed and supervised for overhauling, servicing and testing & function tested various type of valves (PSV, PCV, PRV, PVV) (High & Low pressure) accordance to API 598/527
- Supervised and monitors to Bundle puller & Hydro jet Technicians, when conducting of Removing tube bundle, hydro jet cleaning, installations, repair & testing of Exchangers ensure follow safety procedure and job done in time
- Coordinate with project manager, Site manager, planners, engineers, and lifting & logistic supervisors to assigned all of operators/drivers to allocate mobilizing & de-mobilizing of mobile cranes, Truck, vacuum trucks for require site activities
- Assigned & supervised, Workshop mechanics technicians to reviewing of vendor manuals, Review of daily, weekly & monthly preventative maintenance reports from mechanic technician, Review Technical drawings, review & developed spare parts lists and PM program of Vehicles & Workshop equipment
- Monitor to Ensure check /inspect daily, Weekly & Monthly prevent maintenance activities for all the Equipment, Such as (Mobile air compressors, Mobile generators, Mobile Lighting towers, Welding sets, heat treatment machines ,Milling Machines, Drilling machines, Lathe machines, Valve test units, Valve polishing machines, Rolling machines, Cutting machines,, Bundle pullers, Hydro jet machines, Steam lance machines ) and Vehicles Such as (mobile cranes, Deck Cranes, Boom Trucks, Tractors, Vacuum Trucks, Forklifts, Reach tractors & Heavy duty machines)
- Supervise, coordinate with client engineers, workshop technicians, when received work request to conduct fabrications, repair, and machining jobs to ensure correct information & drawing/sketch and job done in time with safely & quality
- DCSM 2019: During DCSM period, supervise for remove, repair & testing and installation of control and manual valves
- Developed and arranged related documents such as valve test report, inspection report and handover forms
- Turn Around 2023: During Turn Around Period, Lead and Supervised Materials Control Team and Workshop for remove, repair & testing and installation of control, PSVs and manual valves.
- Identified areas needing improvement within the existing curriculum by analyzing post-workshop evaluation data.
- Mentored junior facilitators to improve their instructional techniques, enhancing the quality of delivered workshops across all offerings.
ENGINEER, MECHANICAL & ROTATING
KEPPEL OFFSHORE & MARINE
01.2001 - 07.2017
- Assist to project Manager in development planning, inspection, repairing various types of Valves
- Function test, Pre-commissioning, and Commissioning of the following valves
- Such as (globe, gate, safety, relief, pressure vacuum, butterfly, swing check, storm, quick closing, etc.) Includes Hydraulic, Pneumatic and Manual operated valves
- Carry out hand on for overhauling, servicing and testing & function tested of Topside Modules valves (High pressure) accordance to API 598
- Carry out hand on for Overhauling, servicing, testing, and inspection of rotary equipment’s such as Cargo pumps, ballast pumps, sea water pumps, freshwater pumps, Lifeboat winches, anchor winches, Gang way winches and Air compressors (Main & Aux)
- Hydraulic Motors and cylinders, Engine Room cranes, monorail Cranes and Lifeboat Winch Gear boxes
- Coordinate with construction team in Mechanical Inspection and punch lists verifications of Installed systems and Vendor’s system packages
- Supervised the group of mechanical technicians and contractors in achieving the Technical Integrity of works and carried out in safe controlled manners in accordance with site procedures and Permit to Work System
- Assist to project Supervisor in development planning, inspection, reporting of various marine & process systems installation status
- Performed the veracity and correct action in process of repairing and modification works as needed
- Produced technical specification and ordering spare parts for various types of valve and new valves as required
- Worked all the Project (Conversion) Vessels such as FPSO, FSO, LNG & LPG
- Repair Vessels such as Tankers, Containers, Bulk Carriers, Dredgers, LNG carrier, LPG carrier, Heavy Lift Vessels, Passenger Vessels, Car Carriers, TUGS, Cable Ships, Crane Barge and General Cargo Carriers
- Team leader of turbine team of Maintenance Department
- Maintenance supervisor for onsite overhaul of Gas Turbine: ALSTOM, SIEMENS, and MITSUBISHI
- Dismantling, inspection, maintenance and re-assembly gas turbine, combustor chamber, air compressor, cooling system, … - Measuring and alignment for system gas turbine and generator
- Troubleshooting and maintain all of gas turbine in operation condition - Upgrading gas turbine by new material with new technology for extension operation hour each overhauls cycle time
- Upgrading inlet system for rise engine power
- Repairing and maintenance for all auxiliary equipment of thermal power plant such as: fuel system, heat recovery system, steam turbine, cooling system, lube oil system, - Repairing and maintenance for feed water pump, jacking pump, condensate pump
- Managing of maintenance team for routine maintenance and plant shutdown maintenance
- Planning for Maintenance Department: tooling, equipment, spare part, manpower
- Training for new staff about maintenance and operation of equipment in thermal power plant.
- Established strong working relationships with clients through exceptional communication skills, fostering trust and collaboration.
- Performed preventative maintenance to keep tools and equipment functional.
Education
High School Diploma -
Ngee Ann Polytechnic.
Singapore.11.2011
Skills
- Microsoft Word, Excel, PowerPoint
Competence
Mechanical Supervisor, Senior Engineer and for Rotating & machinery equipment. Such as machine shop, vessel construction, conversion and repairing of FSO, FPSO production onshore Systems Installation, installation, and maintenance activities; management responsibilities included coordination, mechanical completion, cost and schedule control, liaison as client at shipyard and project site. As a Mechanical Engineer to Carry out hand on for overhauling/Services Testing, pre commissioning & Commissioning of all the rotary Items Winches/Gearboxes (Pumps Lifeboat winches, anchor & davit winches Manorial & Engine Room Cranes) and Valves
Summaryofskillmainduties
Supervise and lead all maintenance processes and operations. Track expenses and oversee the budget for maintenance. Maintain all machinery to ensure it’s at working standards. Create and implement maintenance procedures. Conduct regular inspections of the facilities to detect and resolve problems. Plan and manage all repair and installation activities. Ensure all department workers adhere to the safety policies and procedures. Assign repair schedules and evaluate repair cost estimates. Document and prepare daily progress reports and maintenance logs. Oversee equipment stock and place orders for new supplies when necessary. Duties include tracking expenses, reporting progress, and assigning schedules.
Additionalcertificateskilltraining
- Basic Electric Welding Course No (16) : (Ministry of Rail Transportation in Myanmar)
- Training Program for Marine Signalmen/Marine Rigger (Association of Singapore Marine Industries, 31 July 2002)
- Skills Evaluation Certificate level-1 in Marine Mechanics (Institute of Technical Education Singapore, 21 August 2003)
- Skills Evaluation Certificate level-2 in Mechanical Technology (Institute of Technical Education Singapore, 14 August 2007)
- Certificate in Marine Supervisor Course (MSC) - PSB Academy Singapore
- Shipyard Supervisors Safety Course- NTCH Learning Hub, 12 December 2006
- Confined Space Course for Shipyard Supervisor pass (ASME 28 March 2011)
- Certificate of Safety Leadership Training- Keppel Shipyard, 23 March 2007
Personal Information
Date of Birth: 10/23/81
Awards
The Most Promising Award in Year 2003 Keppel Offshore & Marine.
The Best Supervisor Award Defect Construction Service Maintenance 2019 PEC.Ltd Singapore (Nghi Son Refinery and Petrochemical.llc.)
Timeline
SNR SUPERINTNEDENT / MAINTENANCE WORKSHOP LEADER
PEC LIMITED
01.2017 - 04.2024
ENGINEER, MECHANICAL & ROTATING
KEPPEL OFFSHORE & MARINE
01.2001 - 07.2017
High School Diploma -
Ngee Ann Polytechnic.
Similar Profiles
Abhinav YadavAbhinav Yadav
International Business Manager at PEC Limited (Govt of India Enterprise)International Business Manager at PEC Limited (Govt of India Enterprise)
Kimberly StaudtKimberly Staudt
Assistant Manager at Burger King PEC ManagementAssistant Manager at Burger King PEC Management
William NewbauerWilliam Newbauer
Course Manager - GS-1712-11 at Cyber & Information Advantage Battalion, PECCourse Manager - GS-1712-11 at Cyber & Information Advantage Battalion, PEC